Stand-Specific FitArtwork is prepared for the 24" × 36" vertical graphic area used by the compatible stand models.
Compatible MaterialsChoose from the graphic materials supported for the selected stand and mounting method.
Portable MessagingUse replaceable or applied graphics for temporary promotions, wayfinding, events, parking and storefront messages.
Signicade® DeluxeLarge two-sided A-frame display for storefronts, events, parking, wayfinding and temporary promotions.Available Colors:White or BlackGraphic Size:24" × 36"Graphic Materials:4mm Coroplast; 3mm PVC; adhesive vinyl only when applied to a compatible rigid insertMounting Hardware:Not required — graphics slide into Quick-Change slotsMessage Board Kit:Available — Plasticade Message Board KitMounting:Slide rigid graphic panels into the Quick-Change slots using the correct finished blank size.
Signicade®Classic molded A-frame design with a large display area on both sides.Available Colors:White, Black, Blue, Green, Orange, Red or YellowGraphic Size:24" × 36"Graphic Materials:4mm Coroplast; 3mm PVC; 3mil Adhesive Gloss Vinyl; 3mil Adhesive Matte VinylMounting Hardware:Well-Nuts & Bolts available for rigid graphics; not needed for adhesive vinylMessage Board Kit:Available — Plasticade Message Board KitMounting:Rigid graphics attach to the molded faces with compatible hardware or hook-and-loop. Adhesive vinyl applies directly to a properly prepared face.
Wind Sign II Quick ChangePortable spring-mounted sign for replaceable two-sided graphics.Available Colors:GrayGraphic Size:24" × 36"Graphic Materials:4mm Coroplast; 3mm PVC; adhesive vinyl only when applied to a compatible rigid insertMounting Hardware:Not required — graphics slide into Quick-Change slotsMessage Board Kit:Available for Wind Signs — use the kit sized for this modelMounting:Slide rigid panels into the Quick-Change frame. Keep each completed panel within the frame's supported weight.
Wind Sign II with Snap FrameDesigned for quick poster changes. Use thin poster media rather than rigid 4mm Coroplast or 3mm PVC.Available Colors:Matte SilverGraphic Size:24" × 36"Graphic Materials:Paper or thin-gauge poster stock; weatherproof poster stock for outdoor useMounting Hardware:Not required — poster is retained by the snap frameMessage Board Kit:Available for Wind Signs — confirm kit compatibility with snap-frame modelMounting:Open the perimeter snap frame, position the poster under the protective cover and close the frame.
Vertical24" × 36" · VerticalPortrait layouts suit standing signs, window graphics, narrow wall graphics, directional panels and other tall displays.
Full Color Front OnlyFull-color face · reverse unprintedThe standard choice for most adhesive graphics, posters, mounted signs, banners and display pieces viewed primarily from one direction.
Coroplast4mm Coroplast (two inserts per sign)Lightweight economical fluted plastic for indoor/outdoor signs.Highlights: Cost-effective; lightweight; weather resistant; fluted; 4mm standard; 10mm thickerBest for: Yard signs; directional signs; events; temporary outdoor signsConsider: Flutes can be visibleFinishing: H-stakes common for 4mm yard signs.
PVC3mm PVC (two inserts per sign)Smooth durable plastic from thin flexible sheets to thick rigid panels.Highlights: Smooth; durable; moisture resistant; multiple thicknessesBest for: Retail signs; menu boards; displays; indoor/outdoor signsConsider: Thicker PVC is heavier
Standard Vinyl3mil Adhesive Gloss Vinyl (two inserts per sign); 3mil Adhesive Matte Vinyl (two inserts per sign)Versatile everyday adhesive vinyl for clean, smooth surfaces.Highlights: Cost-effective; general-purpose; smooth; indoor/outdoor; gloss or matteBest for: General signs; windows; smooth panels; promotional graphicsConsider: Not for difficult low-energy surfaces; not a vehicle-wrap substituteFinishing: Lamination can add abrasion/UV protection.
Well-Nuts & BoltsChoose this accessory when the selected stand and graphic installation require mechanical fastening.Details:Compatible mounting hardware for attaching rigid graphic panels to applicable molded Plasticade stand faces.
5–7 Business DaysExtended standard productionFor projects that need additional fabrication, finishing or scheduling time beyond the standard production window.
3–4 Business DaysStandard productionBest for most estimator projects and configurations where normal production scheduling is acceptable.
Upload Print File NowArtwork is ready with the orderUpload the production file during ordering so preflight can begin without waiting for a separate file submission. PDF is preferred when practical.
Upload Print File LaterProvide artwork separatelyUse this when pricing or order setup needs to be completed before the final production file is ready. Production timing begins after usable artwork is received and approved.
Request Design Service (Bill Later)Design / prepress assistance requiredChoose this when the project needs layout, cleanup, resizing, contour-path setup or other design assistance before it can move into production.
Which stand models are included?This product includes Signicade® Deluxe, Signicade®, Wind Sign II Quick Change, Wind Sign II with Snap Frame. Choose the model and color that fit the display location, replacement needs and preferred mounting method.
How many graphic faces are needed?Most Plasticade portable signs are viewed from both sides and use two graphic faces per finished stand unless the selected model notes otherwise.
Which graphic material should I choose?Available material choices for this product are 4mm Coroplast (two inserts per sign); 3mm PVC (two inserts per sign); 3mil Adhesive Gloss Vinyl (two inserts per sign); 3mil Adhesive Matte Vinyl (two inserts per sign). Choose based on rigidity, replacement needs, mounting method and whether the graphic is an insert or applied to a molded face.
Are mounting hardware or message-board kits available?When a stand supports hardware or a message-board kit, that information is shown on the stand card and available in the product choices.
What file format should I provide?A print-ready PDF is preferred whenever practical. Keep important text and logos inside the safety area and use adequate image resolution at the final printed size.
Can you help prepare the artwork?Yes. Choose the design-assistance artwork option when the file needs layout, cleanup, resizing or other preparation before production.
How quickly can this product be produced?Available production choices are 5–7 Business Days; 3–4 Business Days for qualifying orders submitted with usable artwork before the applicable cutoff. Shipping or delivery time is separate.
